essentialpim pro stop edit underline in notes

LiPo batteries don't draw the maximum for the full time it takes to charge the phone. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Technical info:The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery. If your phone is not connected to a charger, you see the discharging current which is negative. 10 seconds ('measuring' is on the display).Īfter this time, the charging or discharging current will be shown.īackground info:The app measures the charging/discharging current of the battery. Ampere is not meant to be mA accurate.Īmpere Pro is only good for evaluate which Charger/USB cable combo is working the best for you on the same device. Please read the list of not supported phones at the end of the description. Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. If your phone is not connected to a charger, you see theĭischarging current which is negative. Ampere measures the charging/discharging current of theīattery. Ampere Pro works on android 4.0.3+ devices.

Essentialpim pro stop edit underline in notes